RF-BM-2652B1 是信馳達科技基于美國德州儀器 CC2652R 為核心自主研發的 SimpleLink 多協議 2.4 GHz無線模塊。 模塊除了集成負責應用邏輯的高性能 ARM Cortex-M4F 處理器與一個專用于負責射頻核心的 ARM Cortex-M0 處理器之外，還具有非常有特色的16 bit 低功耗傳感器處理核心。具有352 KB 的可編程閃存和 80 KB 超低泄漏RAM(SRAM)。支持 Thread、ZigBee、低功耗藍牙5.0、Wi-SUN、6LoWPAN等無線通信協議。
| 芯片型號 | CC2652R |
| 工作電壓 | 1.8V 至 3.8V，推薦為3. 3V |
| 工作頻段 | 2402MHz ～ 2480MHz |
| 最大發射功率 | +5 dBm |
| 接收靈敏度 | -100 dBm @ 802.15.4 (2.4 GHz) -105 dBm @ Bluetooth 125-kbps (LE Coded PHY) |
| GPIO數量 | 31 個 |
| 功耗 | 接收電流：6.9 mA |
| RAM | 80 KB |
| FLASH | 352 KB |
| 晶振頻率 | 48 MHz |
| 封裝方式 | SMT 封裝 （郵票半孔） |
| 通訊接口 | UART，I2S，I2C，SPI，ADC |
| 模塊尺寸 | 22.5 x 17.03 mm |
| 工作溫度 | -40℃ ～ +85℃ |
| 儲存溫度 | -40℃ ～ +125℃ |
實測功耗
從不以理論值代替實際值宣傳
三核芯
實測距離
在天氣情況 空曠可視 距地約為2米的郊區進行測試
高低溫
能夠適應各種惡劣環境
寬電壓
更寬的電壓適用范圍
應用場景
引腳圖
CC2652R Pin碼表
| 引腳序號 | 名稱 | 功能 | 備注 |
| 1 | P00 | GPIO | GPIO, Sensor Controller |
| 2 | P01 | GPIO | GPIO, Sensor Controller |
| 3 | P02 | GPIO | GPIO, Sensor Controller |
| 4 | P03 | GPIO | GPIO, Sensor Controller |
| 5 | P04 | GPIO | GPIO, Sensor Controller |
| 6 | P05 | GPIO | GPIO, Sensor Controller, high-drive capability |
| 7 | P06 | GPIO | GPIO, Sensor Controller, high-drive capability |
| 8 | P07 | GPIO | GPIO, Sensor Controller, high-drive capability |
| 9 | P08 | GPIO | GPIO |
| 10 | P09 | GPIO | GPIO |
| 11 | P10 | GPIO | GPIO |
| 12 | P11 | GPIO | GPIO |
| 13 | P12 | GPIO | GPIO |
| 14 | P13 | GPIO | GPIO |
| 15 | P14 | GPIO | GPIO |
| 16 | P15 | GPIO | GPIO |
| 17 | JTAG_TMSC | JTAG_TMSC | JTAG TMSC, high-drive capability |
| 18 | JTAG_TCKC | JTAG_TCKC | JTAG TCKC |
| 19 | P16 | GPIO | GPIO, JTAG_TDO, high-drive capability |
| 20 | P17 | GPIO | GPIO, JTAG_TDI, high-drive capability |
| 21 | P18 | GPIO | GPIO |
| 22 | P19 | GPIO | GPIO |
| 23 | P20 | GPIO | GPIO |
| 24 | P21 | GPIO | GPIO |
| 25 | P22 | GPIO | GPIO |
| 26 | P23 | GPIO | GPIO, Sensor Controller, Analog |
| 27 | P24 | GPIO | GPIO, Sensor Controller, Analog |
| 28 | P25 | GPIO | GPIO, Sensor Controller, Analog |
| 29 | P26 | GPIO | GPIO, Sensor Controller, Analog |
| 30 | P27 | GPIO | GPIO, Sensor Controller, Analog |
| 31 | P28 | GPIO | GPIO, Sensor Controller, Analog |
| 32 | P29 | GPIO | GPIO, Sensor Controller, Analog |
| 33 | P30 | GPIO | GPIO, Sensor Controller, Analog |
| 34 | VCC | 電源 | 模塊電源: 1.8 V ~ 3.8 V，推薦3.3 V |
| 35 | GND | 地 | / |
| 36 | RESET | 復位腳 | 復位，低電平有效。無內部上拉 |
設計.仿真
良好的性能來源于全局仿真介入
真正的好產品 都是"精打細算"設計而出，強大的設計能力才能做出好產品
設計.天線
天線是通信系統關鍵環節
好的天線是通信系統穩定的核心競爭力
實力認證
九年技術積累 領跑無線行業
機械尺寸
引腳定義
| 引腳序號 | 名稱 | 功能 | 備注 |
| 1 | P00 | GPIO | GPIO, Sensor Controller |
| 2 | P01 | GPIO | GPIO, Sensor Controller |
| 3 | P02 | GPIO | GPIO, Sensor Controller |
| 4 | P03 | GPIO | GPIO, Sensor Controller |
| 5 | P04 | GPIO | GPIO, Sensor Controller |
| 6 | P05 | GPIO | GPIO, Sensor Controller, high-drive capability |
| 7 | P06 | GPIO | GPIO, Sensor Controller, high-drive capability |
| 8 | P07 | GPIO | GPIO, Sensor Controller, high-drive capability |
| 9 | P08 | GPIO | GPIO |
| 10 | P09 | GPIO | GPIO |
| 11 | P10 | GPIO | GPIO |
| 12 | P11 | GPIO | GPIO |
| 13 | P12 | GPIO | GPIO |
| 14 | P13 | GPIO | GPIO |
| 15 | P14 | GPIO | GPIO |
| 16 | P15 | GPIO | GPIO |
| 17 | JTAG_TMSC | JTAG_TMSC | JTAG TMSC, high-drive capability |
| 18 | JTAG_TCKC | JTAG_TCKC | JTAG TCKC |
| 19 | P16 | GPIO | GPIO, JTAG_TDO, high-drive capability |
| 20 | P17 | GPIO | GPIO, JTAG_TDI, high-drive capability |
| 21 | P18 | GPIO | GPIO |
| 22 | P19 | GPIO | GPIO |
| 23 | P20 | GPIO | GPIO |
| 24 | P21 | GPIO | GPIO |
| 25 | P22 | GPIO | GPIO |
| 26 | P23 | GPIO | GPIO, Sensor Controller, Analog |
| 27 | P24 | GPIO | GPIO, Sensor Controller, Analog |
| 28 | P25 | GPIO | GPIO, Sensor Controller, Analog |
| 29 | P26 | GPIO | GPIO, Sensor Controller, Analog |
| 30 | P27 | GPIO | GPIO, Sensor Controller, Analog |
| 31 | P28 | GPIO | GPIO, Sensor Controller, Analog |
| 32 | P29 | GPIO | GPIO, Sensor Controller, Analog |
| 33 | P30 | GPIO | GPIO, Sensor Controller, Analog |
| 34 | VCC | 電源 | 模塊電源: 1.8 V ~ 3.8 V，推薦3.3 V |
| 35 | GND | 地 | / |
| 36 | RESET | 復位腳 | 復位，低電平有效。無內部上拉 |
